v3.6r2 under Crossover for Mac

Please post your support queries here.

Moderator: Derek

v3.6r2 under Crossover for Mac

Postby renowden » Thu Feb 11, 2010 6:37 pm

I can't seem to get this installed under Crossover for Mac 8 - the previous one v3.6r1 was ok. The error I am getting is after all the prompts for licence, location etc. I get Access Violation at address 00000000. Write to address 00000000. Any ideas why this should be. All previous versions back to about 3.3 have been ok. My binary installs under VMWare Fusion ok so that is not corrupt (but not so usable there). If all else fails I will continue with the existing version.
Cheers,

Rick Parsons

Bristol, England
renowden
 
Posts: 68
Joined: Mon Oct 15, 2007 11:20 am
Location: Bristol, England

Postby Derek » Fri Feb 12, 2010 12:03 pm

Hello Rick

Yes, there does appear to be a problem installing the latest version on a Mac. It's odd because the program installs OK on Linux using the same basic libraries. I'll need to investigate this further and get back to you.
Derek Higgins
Wave Corrector Developer
http://www.wavecor.co.uk
Derek
Site Admin
 
Posts: 476
Joined: Sat Jan 01, 2005 7:57 pm
Location: Coleshill, United Kingdom

Postby Derek » Fri Feb 12, 2010 1:09 pm

Hello again Rick

The problem appears to be with the installer which I updated just before v3.6 was released. I've reverted to an earlier release of the installer and created a new installation file. This one seems to install without problem on the mac.

You can download the modified installation file here:

http://www.wavecor.co.uk/wcor_36_mac.exe

let me know if it works.

regards
Derek Higgins
Wave Corrector Developer
http://www.wavecor.co.uk
Derek
Site Admin
 
Posts: 476
Joined: Sat Jan 01, 2005 7:57 pm
Location: Coleshill, United Kingdom

Postby renowden » Fri Feb 12, 2010 4:57 pm

Thanks Derek. Works perfectly. Your response always amazes me.
Cheers,

Rick Parsons

Bristol, England
renowden
 
Posts: 68
Joined: Mon Oct 15, 2007 11:20 am
Location: Bristol, England


Return to Support

Who is online

Users browsing this forum: No registered users and 3 guests

cron